GREENCHOICE SUBFLOOR CONSTRUCTION ADHESIVE


Titebond GREENchoice Subfloor Construction Adhesive is a professional strength formula that is specifically designed for subfloor installations and general plywood use. It provides a permanent bond that remains flexible, reduces nailing and helps prevent squeaky floors. The VOC-compliant, nonflammable formula is environmentally safe...

more

Features & Benefits

check_circle
Recommended For: Subfloor installations, general plywood use, as well as filling gaps and irregularities in the subfloor.
check_circle
Compatible Materials: Common building materials including wood, engineered lumber, particleboard, OSB and wet, frozen and treated lumber.
check_circle
All Weather 20°F - 120°F
check_circle
Water-based
check_circle
Environmentally safe
check_circle
Fills gaps and irregularities
check_circle
Highly water-resistant when dry
check_circle
Excellent aging qualities
check_circle
Offers freeze/thaw stability
check_circle
Cleans easily with water in wet state
check_circle
Cartridge and carton contain post-consumer recycled material
check_circle
Reduces nailing
check_circle
Excellent strength
check_circle
VOC-compliant

Application Guidelines

Application Temperature:
20°F to 120°F
Service Temperature Range:
0°F to 120°F
Working Time:
Approximately 20 minutes for a 1/4" bead
Prep:
Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application:
Cut tip straight across for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to each furring strip, stud or floor joist to be covered. Adhere materials within 15 minutes or before skinning of adhesive occurs. Position material to be bonded and press firmly for full contact with adhesive. Note: For subfloors, apply adhesive to joists for one sheet at a time. Nail or screw each sheet as recommended by the American Plywood Association.
Cleanup:
Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesive may be cleaned with water/acetone/vinegar mixture. Follow solvent vendor’s precautions.
Limitations:
Not designed for continuous submersion or for use on plastics or polyethylene foams. Do not adhere one non-porous material to another as this will slow or prevent drying.

Physical Properties

Type
Blend of polymer emulsions
Color
Off white
State
Medium-viscosity mastic
Solids
67.5%
Viscosity
82,500 cps
pH
7.5
VOC
< 50 g/L
Weight Per Gallon
10.64 lbs.
Flashpoint
> 200°F
Freeze/thaw Stability
Stable
Storage Life
18 months in an unopened container

Coverage

Size1/8” Bead1/4" Bead3/8" Bead1/2" Bead
28 Oz. Cartridge355 ft.86 ft.39 ft.21 ft.


Specifications & Certifications

  • Exceeds APA AFG-01 and ASTM C557.