TITEBOND SPEED SET WOOD GLUE


Titebond Speed Set Wood Glue is an extremely fast-setting, high solids PVA adhesive. It provides exceptional gap filling properties developing a bond stronger than the wood itself. This product offers excellent sandability, unaffected by finishes, and increases productivity through its shorter clamp time with no increase in viscosit...

more

Features & Benefits

check_circle
Extremely fast set – 15 minute clamp time
check_circle
Excellent strength & durability
check_circle
Visible under black light
check_circle
Unaffected by finishes
check_circle
Heat resistant – Sands easily
check_circle
Easy water cleanup

Application Guidelines

Application Temperature:
Above 59°F
Open Assembly Time:
2-4 minutes (70°F / 50% RH / 8% MC)
Total Assembly Time:
8-10 minutes (70°F / 50% RH / 8% MC)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Method of Application:
Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 59°F. Do not Freeze. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Physical Properties

Type
Aliphatic resin emulsion
Calculated VOC
5.6 g/L
State
Liquid emulsion
Weight Per Gallon
9.3 lbs.
Color
White
Dried Film
Translucent
Flashpoint
>200°F
Solids
60%
Viscosity
3,600 cps.
Freeze / Thaw Stability
Not stable
pH
4.7
Chalk Temperature
To assure a good bond, 59°F is the lowest recommended temperature for the glue, air and materials during application and drying.
Storage Life
24 months in tightly closed containers at 75°F. For best results, mix glue every 30 days to reduce settling.

Bond Strength ASTM D-905 (On Hard Maple)

Temperature Strength Wood Failure
Room Temperature 4,178 psi 77%
150°F. Overnight 1,527 psi 10%


SPECIFICATIONS

  • CONFORMS TO ASTM D-4236