Titebond

TITEBOND UA 920 SEALANT

Titebond UA 920 Sealant is a high performance, elastomeric, urethane acrylic formula with superior adhesive properties and increased flexibility for durable, crackproof seals. It eliminates shiners, reduces dirt pickup and has great UV resistance, making it ideal for interior and exterior applications. The professional formula has superior handling and tooling properties, paintable in one hour and cleans easily with water.

*Color samples are digitally produced to best match product color. Actual product color may vary from the color shown. Product color may vary when wet but will achieve proper color when dry after 24 hours.

Features & Benefits

  • IDEAL FOR: Interior and exterior projects such as windows, doors, siding, trim, soffits and crown molding.
  • SEALS: Wood, masonry, fiber cement, metal, vinyl siding, concrete and most common building materials
  • Permanently flexible and crackproof
  • Fills gaps up to 1” wide
  • Superior tooling
  • Cleans up with water
  • UV resistant
  • Interior and exterior use
  • Paintable
  • Unbeatable adhesion to most common building materials

Specifications

Complies with the following requirements:
  • ASTM C920 Type S Grade NS Class 35 Use NT, M, G & A
  • ASTM C834 Type OP Grade -18°C
  • FEDERAL SPECIFICATION TT-S-00230C TYPE II CLASS A
Meets:
  • AAMA 808.3

Application Guidelines

  • Application Temperature: Above 40°F (4°C)
  • Service Temperature Range: 0°F - 160°F (-18°C - 71°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 15 minutes for a 1/4" bead
  • Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint depth is half as thick as width but not to exceed ½ inch thickness (on joints over 1 inch wide). 2. Cut tip at 45° angle to desired bead width and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. NOTE: If using as an adhesive, bracing may be required until the product dries. Mechanical fasteners should be used for heavy loads.
  • Painting: The sealant should be ready to paint in 1-2 hours with a water-based (latex-based) paint that does not contain plasticizer.
  • Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

ASTM C794

  Dry Peel Adhesion Wet Peel Adhesion
Aluminum 32-42 FD/C 20-28 C
Glass 39-45 FD/C 25-28 C
Cement (8) SF 14-24 C

Physical Properties

  • Type: Elastomeric urethane acrylic
  • Calculated VOC: <1.5%
  • Color: White and colors
  • Solids: 80% white & colors
  • Flashpoint: Solvent free/Not applicable
  • Freeze / Thaw Stability: Stable
  • Viscosity: 140,000 cps
  • Storage Life: 24 months in a dry location at or below 75°F

Limitations

Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F (4.4°C) Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 1-2 hours with a water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended. Do not use for aquariums. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F. For questions, please call our Help Line at 1.800.347.4583.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
870010370838700151003708387001210.1 Oz. Cartridge - White11.0012108
870110370838701141003708387011110.1 Oz. Cartridge - Black11.0012108
870210370838702131003708387021010.1 Oz. Cartridge - Medium Bronze11.0012108
870310370838703121003708387031910.1 Oz. Cartridge - Dark Bronze11.0012108

Warranty Statement

50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International