WEATHERMASTER SEALANT


Titebond WeatherMaster Sealant is a premium-grade, superior polymer formula that offers unbeatable adhesion to wood, vinyl siding, masonry, PVC, fiber-cement siding/trim and most common building materials. It can be extruded in low temperatures, remains permanently flexible with zero shrinkage, adheres well to damp surfaces and prov...

more

Watch Video

Features & Benefits

check_circle
IDEAL FOR: Sealing windows, doors, shutters, exterior trim, siding, gutters and vents.
check_circle
SEALS: Siding, windows, doors, PVC, glass, fiberglass, masonry, wood and most common building materials.
check_circle
Joint movement capability ± 50%
check_circle
Superior polymer technology
check_circle
Applies in extreme weather conditions
check_circle
Fills gaps up to 1 inch wide
check_circle
Remains flexible - Will not crack
check_circle
UV-resistant
check_circle
Paintable in one hour*
check_circle
VOC-compliant
check_circle
Mold and mildew resistant
check_circle
Compatible with all types of foam

Application Guidelines

Complete Installation Instructions:
For complete installation instructions, please visit our Sealant Installation Guide for more information.
Application Temperature:
Above 0°F (-18°C)
Service Temperature Range:
-75°F. to 212°F (-59°C to 100°C) white & colors, -75°F to 250°F (-59°C to 121°C) crystal clear (may discolor at higher temperatures), -40°F to 400°F (-40°C to 204°C) translucent
Method of Application:
Cartridge/caulking gun
Tooling Time:
For a 1/4" bead, approximately 10-15 minutes, depending on temperature and humidity.
Application Directions:
1. Surfaces must be clean and free of any material that may prevent adequate adhesion. 2. Remove nozzle, cut tip of the nub and puncture inner foil seal. 3. Screw nozzle onto cartridge and cut tip on slant for 1/4" to 3/8" bead and place in cartridge gun. 4. Force sealant into clean joint. Always apply sealant in bead form. To ensure neat sealant lines, mask areas adjacent to joints. Once sealant is dry to the touch and does not transfer, remove masking tape. No tooling is required. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
Substrate Compatibility:
If application is for Kynar™ coated materials, use WeatherMaster Metal Roof Sealant. For use on polycarbonate, check with polycarbonate supplier on compatibility. Do not apply WeatherMaster Translucent to polycarbonate due to solvent cracking. For questions, please call our Help Line at 1-800-347-4583.
Painting:
Sealant is intended for exterior use. If used indoors, sealant may need to be painted. In most cases, painting may occur one hour after application with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. It is recommended to paint over sealant with a shellac-based primer before painting. For other paint types, a compatibility test is recommended.
Cleanup:
Clean uncured material with acetone or isopropyl alcohol. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
Coverage:
Container1/8” Bead1/4" Bead 3/8" Bead 1/2" Bead
9.5 oz. Cartridge116 ft. 29 ft. 13 ft. 7 ft.
Limitations:
Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 0°F.  Once sealant is applied, do not wipe with solvents or tooling aids such as soaps or oils. DO NOT TOOL – DO NOT SMEAR. It is highly recommended to use backing material. Application of sealant at high temperatures may cause the sealant to sag in some applications. Check with polycarbonate supplier on compatibility. Sealant releases methanol during cure, check with substrate manufacturer for compatibility. For best results, store in a dry location at or below 75°F. Contact with asphalt or butyl may cause discoloration, but will not affect product performance. Due to high heat, it is NOT recommended to store sealants above the second shelf (>20 feet high) in a warehouse.

*Titebond WeatherMaster - Translucent (#44011) is not paintable.

Physical Properties

Type
Elastomeric superior polymer
Reactive VOC
<50 g/L (<2%) white/colors/clear, <50 g/L (<1.5%) translucent
Solids
100%
Viscosity
102,000 cps white & colors; 650,000 cps clear & translucent
Freeze / Thaw Stability
Stable
Flashpoint
Solvent free/Not applicable
Storage Life
24 months in a dry location at or below 75°F; 24 months clear & translucent

Specifications

Exceeds:
  • ASTM C920, TYPE S, GRADE NS, CLASS 50, USE T, NT, M, G AND A
  • FEDERAL SPECIFICATION TT-S-00230C TYPE II CLASS A
  • CAN/CGSB-19 13-M87 CLASSIFICATION MCG-2-25-A-N
Meets the requirements of:
  • AAMA 802.3-16 Type II (white & colors)
  • AAMA 803.3-16 (white & colors)
  • AAMA 808.3-16 (white & colors)
  • LEED v4.1 Certified (white & colors)
  • AAMA 714-19 (white & colors)
  • California Department of Public Health (CDPH) Standard Method v1.2–2017
USDA COMPLIANT Meets the requirements of: AAMA 803.3-16 (white & colors)

Warranty Statement

Liability is limited to product replacement only.